Drill Engineering Services
Energy Projects
SAMSUNG & ACWA POWER made by the joint venture and total cost of nearly $1 billion, the Kirıkkale 964 Megawatt Combined Cycle Power Plant project; Turkey will be one of the largest natural gas power plants. Turkey will meet the energy needs of 3%. This plant expert attogroup regarding SAMSUNG & ACWA POWER to meet the water needed to cool the turbine preferred.
Horizantal Directional Drilling System
Orientable Horizontal Drilling method is the laying of HDPE (High Density Polyethylene) and Steel pipes underground without any open excavation. Thanks to its ability to be tracked from above at every stage, it enters and exits from the desired point without damaging the existing structures and networks under the ground.
Pipe Replacement System
These are trenchless methods used to replace existing pipelines in the same pipeline without physically removing the existing pipeline. To replace a pipe, it is the renewal process by using the existing alignment and splitting the old pipe.
Micro-Tunnel System
Conventional pipe pushing method is the applied method in tunnel works that cannot be done with a horizontal helix drilling under obstacles such as highways and railways, by employing a worker and a construction machine inside the pipe.
Tunnel
Passages are formed by making dig underground. To accomplish the purpose of manufacturing in accordance with the construction and service tunnels: On the ground, structural geology, physical geology and the results of the evaluations made after the examination of the regional geology of the tunnel route and slope, size shape, portals and shaft locations projected by calculating the ground stability and the project in accordance with the tunnel construction specification is complete.
Piling
Carrying capacity is pouring over piles made to transport the solid ground floor of the building with low loads. These stakes piles drilling methods is the area under the condition of the floor structure, diameter and depth of the pile it depends. Hole diameter can be between 50 cm and 15o cm. Also piles of deep excavation support structures and slope stability into force if needed to rigid vertical elements in the solution is made.
Jet Grout
This method floor, min. 300 bar to fill the cavity of the ground pressure of the sprayed water and cement mixture and is obtained by compressing. Injection (grouting) will help to build a high kinetic energy passes through the nozzie. The speed of the water-cement mixture 250m/ sec reaching, combined with the ground floor of tearing injection cement floor structure consists soilcrete. This mixture is homogeneous and is a continuous structure characterized. 40 cm. and 100 cm. in manufacturing it can be done.
Anchorage
After placing cement injection into the ground and then passing on the floor of the stability of the equipment is subjected to tensile stress is called anchoring the prestressing increasing process. prevention of vertical displacement in deep excavations are horizontal elements for the purpose of securing against rotation of the structure.
Carottage Mining
Located underground geological formations and underground resources (coal. metallic minerals, natural gas, oil, etc.) To collect informat an about the transactions and to open wells with the aim to start the production company is called in mine drilling Ceratene receiver core drilling progress during the drilling process using special tools also called core samples
ATTOGROUP DRILLING ENGINEERING
In our rapidly developing globe, a serious competition is being observed to be able to take the new projects down under the ground within shorter time and more cost-effective contexts. In the countries of the world, Horizontal Directional Drilling System (HDD) and Micro-Tunnel System, known as the Horizontal Directional Drilling Technology (HDD) has been offering, in this field, earnings to the economies of the countries and with its being applicable in projects such as natural gas, fresh water, electricity, telecommunication etc, comforts during daily life-style, as well. Our vision as Attogroup is to apply the infrastructure-related modern technologies practiced across the earth in our country, too. Therefore; with its modern machinery fleet and specialized staff, Attogroup has successfully accomplished a great deal of projects found to be impossible in our country.
Pictures from the Field
Our Location
20A Red Lion Street Richmond, London / United Kingdom TW9 1RW
Working Hours
Mon-Sat: 7AM-5PM
Sunday: Closed
Call Center
Give us a free call
+44 7908 024044
+44 7585 510615
Global Service
Operating in United Kingdom, Morocco, Slovenia and Turkey